Every couple weeks or so, we send out a little roundup of new recipes, techniques, and tutorials that we’ve recently posted on the site. Occasionally we announce exclusive giveaways to newsletter subscribers as well. We won’t spam you with ads or share or sell your email address. Every email we send has a 1-click unsubscribe link if you decide it’s not for you.
What to do if your starter is sluggish or “dead”
It can be disheartening when your new (or longstanding) starter does nothing after you feed it. Maybe it has no bubbles at all. Maybe it expands just a tiny bit. Maybe it separates into layers of sludge and watery liquid. None of these are ideal scenarios when you’re hoping your starter will double in size within eight hours of feeding and eventually transform dough into a scrumptious lofty bread.
What do you do with this dead looking starter? Let’s first check some of the basics of good starter health. After we cover them, we’ll talk about what else might be happening and how to fix it.
For your starter to thrive, you should be using:
If you’ve botched one of the above bullets, simply modify that aspect of your process. And still read the instructions below as the info could help you get your starter to thrive sooner.
If you’re doing all the above already, then other aspects of your starter care might benefit from being adjusted: timing, hydration, and temperature.
Timing and Temperature
Sometimes the microbes in your starter simply need time to metabolize all the feedings. This is usually the case in cold environments (AC under 70F, winter kitchens). If your starter is barely bubbling or not bubbling at all 12-24 hours after the last feeding, simply stir it again and let the jar sit for a day or two. Then feed again and see if you get bubbles. If possible, find a spot in your house where the temps are over 70F but under 85F. This could be near a warm appliance, radiator, under a lamp, in the oven with the light on, on a heating pad, or in a closed box next to a bowl of boiling water.
Sometimes the opposite is happening, and the food supply for your starter is running out long before you give it the next feeding. Usually this is the case when your kitchen is warm or you’re under-feeding the starter (giving it a small amount of water and flour relative to existing starter — see this starter feeding FAQ for info on feeding ratios). If you’ve been seeing bubbles, but your starter looks deflated or has liquid “hootch” on top by the time you feed it again, the microbes are likely metabolizing the feedings quickly. In that case, you may want to feed sooner. You can also feed more new flour and water, or use cooler water when you feed.
Hydration
Sometimes your starter is bubbly after each feeding, but it never expands or expands very little. This can mean it needs several rounds of peaking and feeding at room temperature to get a larger microbial population flourishing in it, or it may simply mean that the starter’s consistency is too thin, and bubbles are popping rather than getting trapped.
Next Steps
In all these situations, it is often helpful to thicken the starter a bit in order to better trap the CO2 and see expansion in the starter.
If in 3 to 4 days of trying these troubleshooting tips, your starter still has no activity, you might make a post in our forum asking for help. Consider uploading pics and outlining what you’ve been doing in order to help our community of home bakers help you.
Additionally, you may want to watch these videos on making, managing, reviving, and drying sourdough starter.
What to do if your starter is sluggish or “dead”